66 54 005 Removing And Installing/Replacing Control Unit For Night Vision System

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)

Necessary preliminary tasks:

Disconnect battery negative lead
Remove TRIM FOR INSTRUMENT PANEL ON RIGHT

Disconnect plug connection (1).

Press tab (2) to side and remove control unit (3) from module carrier.

Fig 1: Identifying Control Unit, Tab And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/CODING .

NOTE:

New component contains a CD with deblocking code.

CD is requested during coding/programming by the SSS.