86 21... Removing ball pivot: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove gas spring,
refer to 86 21... REMOVING GAS SPRING .
refer to 86 21... REMOVING GAS SPRING .
NOTE:
The following text describes how to remove the ball pivot from the hinge retaining bracket on the rear lid as an example. Proceed in the same way for the other ball pivots.
Make sure the attachments are reinstalled in the correct sequence. Only in this way will the gas springs open and close properly.
Make sure the attachments are reinstalled in the correct sequence. Only in this way will the gas springs open and close properly.
Grip ball pivot (1) at hexagon mount (2) and release nut (3).