LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2014 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2495 (Trailers - Repair) >> Hood >> 86 21... Replacing inside light
April 5, 2026: LEMON Manuals is launched! Read the announcement.

86 21... Replacing inside light

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Unclip cover (1) at side recess (arrowed) and remove towards bottom.

Fig 1: Unclipping Cover At Side Recess
G04766504Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lamp housing (1) at side recess (arrowed).

Fig 2: Unclipping Lamp Housing At Side Recess
G04766505Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect flat connector (1) from flat connector contact.

Fig 3: Disconnecting Flat Connector From Flat Connector Contact
G04766506Courtesy of BMW OF NORTH AMERICA, INC.
CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1). Pull off inside light mounting bracket (2) over flat connector (3).
Fig 4: Drill Out Rivets (1) And Pull Off Inside Light Mounting Bracket (2) Over Flat Connector (3)
G04766507Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals