86 10... Removing overrunning equipment/maintaining or replacing guide bush/installing overrunning equipment: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
After installing overrunning equipment, readjust brake system,
refer to 86 10... ADJUSTING BRAKE SYSTEM
Check the guide bush while installed to ascertain whether it needs to be replaced. Raise ball end area and replace guide bush if play is detected in ball end area.
NOTE:
After installing, readjust and check brake system.
Release round head screws (1) and remove running board (2) towards top.