86 10... Removing shock absorber from overrunning equipment: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Check the overrunning equipment shock absorber while installed to ascertain whether it needs to be replaced.

Apply handbrake. Push in and pull out tow ball end by hand. If it is very easy to pull out the tow ball end, the shock absorber must be replaced.

NOTE: Complete disassembly of overrunning equipment and guide bush,
refer to Disassembly of overrunning equipment.

Release screw (1) and remove. Pull out internal shock absorber (2) from opening in tow tube (3) towards rear.