April 5, 2026: LEMON Manuals is launched! Read the announcement.

86 10... Replacing 12 volt socket: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Position all seals correctly. Also secure plug with grommet (2) using new cable tie to other socket.

Fig 1: Identifying Cable Tie

G04766414

Courtesy of BMW OF NORTH AMERICA, INC.

On upper side of platform, release Phillips screws (1) on mounting bracket (2).

Fig 2: Identifying Phillips Screws On Mounting Bracket

G04766415

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound along white marking (1).

Fig 3: Remove Sealing Compound Along White Marking

G04766416

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure cable is correctly laid.

Use Sikaflex 221 as sealing compound.

Grip under mounting bracket (1) with a screwdriver and lever out bracket (1) towards top. Remove bracket (1).

Fig 1: Gripping Under Mounting Bracket

G04766417

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1). Remove socket (2) from mounting bracket (3).

Fig 2: Remove Socket From Mounting Bracket And Nut

G04766418

Courtesy of BMW OF NORTH AMERICA, INC.