Rotor Test
- Check continuity across rotor slip rings. Resistance should be within specification. See ROTOR RESISTANCE SPECIFICATIONS table. Replace rotor if no continuity exists or resistance is not within specification.
- Check continuity between individual slip rings and rotor shaft. If there is continuity, rotor coil or slip ring is grounded. Replace rotor.
ROTOR RESISTANCE SPECIFICATIONS
| Application | Ohms |
|---|---|
| Galant & Sigma | 3.0 |
| Montero & Raider | 3.0-5.0 |
| Precis | 4.0-5.0 |
| Van/Wagon | 4.3 |
| All Others | 3.1 |