DRB-II Key Functions
- YES or Down Arrow & NO or Up Arrow
Keys will move lines on screen up or down allowing you to choose an item or scroll through all selections available. - F1 & F2 Keys
Keys are used to scroll through sensor displays. - ATM Key
Key will return you to previous screen. - ENTER Key
Allows you to select a test or display. The flashing arrow must be on the display you wish to select. Pressing ENTER in the sensor state will cause display to change from a 3-line display to a 1-line display. - F3 Key
Key is used to display a help screen. This key may be used at any time. - Number Keys
Keys are used for choosing a display or test by the number for the test or display. - READ/HOLD Key
Key is used to freeze any sensor display. - MODE & ATM Key
Pressing MODE and ATM key at the same time will cause DRB-II to reset to copyright screen.