Fluid Pressure Testing
- Remove pressure hose from oil pump. Attach Pressure Gauge Adapter (C-3309-E ). Tighten to 22-29 ft. lbs. (30-39 N.m).
- Start engine and let idle. Place thermometer in reservoir. Close gauge valve 3 times to bleed air from gauge. Check fluid level. Add fluid as necessary.
- When oil temperature reaches 131°F (55°C), check pressure. Refer to OIL PUMP PRESSURE SPECIFICATIONS table. Reinstall pressure hose. Do not twist hose or let hose interfere with adjacent parts.
CAUTION:
DO NOT keep shut-off valve closed more than 3 seconds at a time. DO NOT keep steering wheel turned more than 10 seconds at a time.
OIL PUMP PRESSURE SPECIFICATIONS
| Application | psi (kg/cm2 ) | |
|---|---|---|
| Montero | ||
| Valve Closed | 1067-1166 (75-82) | |
| Valve Open (Maximum) | 142 (10) | |
| Pickup | ||
| Valve Closed | 1067-1116 (75-82) | |
| Valve Open | 114-142 (8-10) | |