LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1991 >> Eclipse GS, 2.0 U, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position Sensor/Switch >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

Throttle position sensor/switch is located on throttle body. Disconnect TPS electrical connector. Remove bolts holding TPS and remove TPS. To install, reverse removal procedure. Tighten throttle position sensor/switch to specification. See TORQUE SPECIFICATIONS  table. For adjustment procedure, see ADJUSTMENTS article.

scientia non olet · About LEMON Manuals