LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1992 >> Mirage Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Self-Diagnostic System >> Retrieving Codes >> Using Scan Tester
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Using Scan Tester

  1. Before entering on-board diagnostics, refer to PRETEST INSPECTION  . Turn ignition switch to OFF position. Locate self-diagnostic connector, next to fuse block. Connect power source terminal of scan tester to cigarette lighter socket.
  2. Connect scan tester to self-diagnostic connector. Turn ignition on. Read and record scan tester self-diagnosis output. Perform necessary repair. See FAULT CODES  .
scientia non olet · About LEMON Manuals