LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Wheel Speed Sensor >> Sensor Resistance Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Resistance Test

  1. Before testing sensor resistance, ensure pole piece-to-wheel speed sensor tip is clean. Check wheel sensor pole piece for damage. If pole piece is damaged, replace sensor.
  2. Disconnect sensor connector. Inspect sensor wiring harness for broken and pinched wires. Repair or replace as necessary. Using an ohmmeter, measure sensor resistance at wiring connector. See WHEEL SPEED SENSOR RESISTANCE SPECIFICATIONS table. If resistance is not within specification, replace sensor. If resistance is within specification, go to GROUND CIRCUIT TEST.
WHEEL SPEED SENSOR RESISTANCE SPECIFICATIONS

Application Ohms
Eclipse 800-1200
scientia non olet · About LEMON Manuals