LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Galant LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self Diagnostic System >> Retrieving Codes >> Using Scan Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tester

  1. With ignition off, connect Multi-Use Tester II (MB991502) with ROM pack to self-diagnostic connector, located under right side of driver's dash.
  2. Turn ignition on. ABS warning light should come on as ABS goes into self-diagnostic mode. Read and record all diagnostic output (trouble) codes from ECU memory. Refer to Multi-Use Tester II (MUT-II) instructions for specific trouble code retrieval procedure.
  3. After all trouble codes have been retrieved and recorded, clear codes from ECU memory. Refer to tester instructions for specific trouble code clearing instructions. See TROUBLE CODE DEFINITION chart.
  4. If trouble codes cannot be cleared, ECU is currently detecting a malfunction. If codes can be cleared, problem is either intermittent or only appears while driving.
scientia non olet · About LEMON Manuals