LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1995 >> Galant LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self-Diagnostic System >> Retrieving DTCS >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

  1. With ignition off, connect Multi-Use Tester II (MUT II) scan tool with appropriate ROM pack to 16-pin Data Link Connector (DLC), located under right side of driver's dash.
  2. Turn ignition on. ANTI-LOCK warning light should come on as ABS goes into self-diagnostic mode. Read and record all Diagnostic Trouble Codes (DTCs) from ABS ECU memory. Refer to scan tool manufacturer's instructions for specific DTC retrieval procedure.
  3. After all DTCs have been retrieved and recorded, clear DTCs from ABS ECU memory. Refer to scan tool instructions for specific DTC clearing instructions. See DTC DEFINITIONS  and perform appropriate test(s) under CIRCUIT TESTS  .
  4. If DTCs cannot be cleared, ABS ECU is currently detecting a malfunction. If DTCs can be cleared, problem is either intermittent or only appears while driving.
scientia non olet · About LEMON Manuals