LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2001 >> Galant LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Component Tests >> Wheel Speed Sensor >> Sensor Resistance Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Resistance Test

  1. Before testing sensor resistance, ensure pole piece-to-wheel speed sensor tip is clean. Check wheel speed sensor pole piece for damage. Replace pole piece if damaged.
  2. Disconnect wheel speed sensor connector. Inspect wheel speed sensor wiring harness for broken and pinched wires. Repair or replace harness as necessary. Using a DVOM, check sensor resistance across wiring connector terminals. Resistance should be 1.28-1.92 /k ohms. If resistance is not as specified, replace wheel speed sensor. If resistance is as specified, go to GROUND CIRCUIT TEST  .
scientia non olet · About LEMON Manuals