Fastener Tightening Specifications

ITEM		SPECIFICATION
Transaxle	Control cable bracket	23 N.m (17 ft-lb)
	Eye bolt	30 N.m (22 ft-lb)
	Fluid temperature sensor	11 N.m (95 in-lb)
	Input shaft speed sensor	11 N.m (95 in-lb)
	Manual control lever	22 N.m (16 ft-lb)
	Manual control shaft detent	6 N.m (52 in-lb)
	Oil filter	12 N.m (104 in-lb)
	Oil pump	23 N.m (17 ft-lb)
	Output shaft bearing retainer <F4A42>	23 N.m (17 ft-lb)
	Output shaft bearing retainer<F4A51>	54 N.m (40 ft-lb)
	Output shaft jam nut	167 N.m (123 ft-lb)
	Output shaft speed sensor	11 N.m (95 in-lb)
	Park/neutral position switch (PNP switch)	11 N.m (95 in-lb)
	Rear cover	23 N.m (17 ft-lb)
	Roll stopper bracket	69 N.m (51 ft-lb)
	Speedometer gear	5 N.m (43 in-lb)
	Torque converter housing	48 N.m (35 ft-lb)
	Transfer drive gear	34 N.m (25 ft-lb)
	Valve body cover	11 N.m (95 in-lb)
	Valve body mounting bolt	11 N.m (95 in-lb)
	Wiring harness bracket	23 N.m (17 ft-lb)
Components	Differential drive gear	132 N.m (98 ft-lb)
	Plate	6 N.m (52 in-lb)
	Solenoid valve support	6 N.m (52 in-lb)
	Valve body	11 N.m (95 in-lb)