LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2002 >> Lancer LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Immobilizer Systems) >> Programming >> Function Selection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Selection

WARNING: This page is about a different car, the 2001 Mitsubishi Montero Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position. Connect MUT-II Scan Tool (MB991502) to Data Link Connector (DLC). Turn ignition switch to ON position.
  2. From immobilizer menu, select SPECIAL FUNCTION. To register key identification (encrypted code), see KEY ID REGISTER (ENCRYPTED CODE REGISTRATION)  . To change immobilizer system password, see PASSWORD SET  .
  3. After registration procedure, turn ignition switch to LOCK position and leave off for at least 10 seconds. Ensure each ignition key can start engine. Ensure immobilizer and PCM DTCs do not reset. Turn ignition switch to LOCK position before disconnecting scan tool.
scientia non olet · About LEMON Manuals