LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Removal, Overhaul & Installation >> Torque Specifications >> Outlander
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications: Outlander

TORQUE SPECIFICATIONS (OUTLANDER)

Applications Ft. Lbs. (N.m)
Center Exhaust Pipe
Bolts 30-37 (40-50)
Nuts 36-51 (49-69)
Crankshaft Pulley Bolts 15-22 (21-30)
Differential Dynamic Damper Nuts (1) 26-39 (35-53)
Differential Mount Bracket-To-Body Bolts 44-59 (60-80)
Differential Mount Bracket-To-Differential Bolts 59-74 (80-100)
Differential Support Arm Bolts/Nuts 59-74 (80-100)
Drive Belt Auto Tensioner Bolt
M8 13-19 (18-26)
M10 25-40 (34-54)
Drive Belt Idler Pulley Bolt 55-62 (74-84)
Drive Shaft Flange-To-Rear Differential Nuts 22-25 (30-34)
Drive Shaft Insulator Nut 19-25 (26-34)
Drive Shaft Insulator Heat Protector Nut 8-11 (11-15)
EGR Solenoid Bolts (2)
Engine Front Mounting Bracket
Bolt 25-40 (34-54)
Nut
With Flange (3) 49-55 (66-74)
With Washer 25-40 (34-54)
Engine Coolant Temperature Sensor 21 (19-29)
Fuel Tank Mounting Nuts 16-22 (22-30)
Heated Oxygen Sensor 32 (44)
Knock Sensor 15-18 (21-25)
Power Steering Pump Bolt 13-19 (18-26)
Power Steering Pressure Switch 19-22 (26-30)
Power Steering Pump Bracket Bolt 30-43 (40-58)
Spark Plugs 14-22 (20-30)
Throttle Body Bolts 12-15 (16-21)
Timing Belt Tensioner Pulley Fixing Bolt 32-39 (43-53)
INCH Lbs. (N.m) 
Accelerator Cable Bolts 35-53 (4-6)
Camshaft Position Sensor Bolt 69-87 (7.8-9.8)
Crankshaft Position Sensor Bolts 69-87 (7.8-9.8)
Fuel Pressure Regulator Bolts 62-96 (7.0-10.8)
Fuel Pump Module Nuts 19-26 (2.1-2.9)
Fuel Rail Bolts 89-106 (10-12)
Fuel Temperature Sensor Bolts 19-26 (2.1-2.9)
High Pressure Fuel Line-To-Fuel Rail Retaining Bolts 35-53 (4-6)
Idle Air Control Motor Bolts 13-22 (1.5-2.5)
Ignition Coil Bolts 71-106 (8-12)
Lower Timing Belt Cover Bolts
With Flange 89-106 (10-12)
With Washer 71-106 (8-12)
Manifold Differential Pressure Sensor Bolt 35-53 (4-6)
Power Steering Pressure Hose Bolts 89-124 (10-14)
Throttle Body Cruise Control Lever Assembly Bolts 35-53 (4-6)
Throttle Position Sensor Bolts 13-22 (1.5-2.5)
Transaxle Control Cable Adjusting Nut (A/T) 89-124 (10-14)
Upper Timing Belt Cover Bolts
M6 89-106 (10-12)
M8 (4)
Water Pump Pulley Bolts 69-87 (7.8-9.8)
(1) When installing component use NEW bolts/nuts.
(2) Information is not available from manufacturer.
(3) This bolt/nut should be initially tightened, and then fully tightened after placing vehicle horizontally and loading full weight of engine on vehicle body.
(4) Tighten to 10-11 Ft. Lbs. (13-15 N.m).