LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Simplified Wiring System (SWS) - Except Evolution) >> Input Signal Check >> Scan Tool Or Voltmeter
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Or Voltmeter

WARNING: This page is about a different variant/trim than selected.
SCAN TOOL OR VOLTMETER PROBLEMS

Symptom Inspection Procedure
ETACS-ECU Does Not Receive Any Signal From The Key Reminder Switch N-1 
ETACS-ECU Does Not Receive Any Signal From Hazard Warning Light Switch N-2 
ETACS-ECU Does Not Receive Any Signal From The Driver's Seat Belt Switch N-3 
ETACS-ECU Does Not Receive Any Signal From All The Door Switches N-4 
ETACS-ECU Does Not Receive Any Signal From The Driver's Or Front Passenger's Door Lock Key Cylinder Switch N-5 
ETACS-ECU Does Not Receive Any Signal From The Driver's Door Lock Actuator Switch N-6 
ETACS-ECU Does Not Receive Any Signal From The DOor Lock Switch (Incorporated In The Power Window Main Switch) N-7 
ETACS-ECU Does Not Receive Any Signal From The Vehicle Speed Sensor (M/T) N-8 
ETACS-ECU Does Not Receive Vehicle Speed Signal (A/T) N-8 
Transmitter - ETACS-ECU Does Not Receive Any Signal From The Lock Or Unlock Switch N-9 
ETACS-ECU Does Not Receive Any Interior Light Loaded Signal N-10