Adjustment Procedures Of SWS Function (Vehicles With Keyless Entry System): Notes
WARNING: This page is about a different variant/trim than selected.
The following functions can be enabled or disabled by operating input switches in a special manner. This set mode is stored after the battery is disconnected.
- Keyless entry hazard answerback function.
- Headlight automatic shutdown function.
- Initialization of above mentioned functions.
NOTE:
The keyless entry hazard answerback can be also adjusted by operating the RKE transmitter. (However, this adjustment can be done more easily by operating the transmitter.) See ENABLING/DISABLING THE ANSWERBACK FUNCTION
in KEYLESS ENTRY article.