Procedures For Calibrating The Compass

Press the "COMP" button. The visual display is now in compass mode and the vehicle's directional heading (N, NE, E, SE, S, SW, W and NW) will be displayed.
Pressing the "COMP" button a second time will turn off the visual display.

Fig 1: Locating "COMP" Button
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
If the display reads "C," there may be a strong magnetic field interfering with the compass. In this case, the compass may need calibration.

Fig 2: Identifying That Display Reads "C"
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Drive the vehicle in a circle at about 5 mph (8km/h) or less until the display reads a direction.

Fig 3: Driving Vehicle In Circle
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.