Auto-Cruise Control System
- General Description
- Special Tools
- Auto-Cruise Control System Diagnosis
- Introduction To Auto-Cruise Control System Diagnosis
- Auto-Cruise Control System Diagnostic Troubleshooting Strategy
- Auto-Cruise Control System Diagnostic Function
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: When The Brake Pedal Is Depressed, Auto-Cruise Control Is Not Cancelled
- INSPECTION PROCEDURE 2: When the Selector Lever is Moved to "N" Range, Auto-cruise Control is not Cancelled.
- INSPECTION PROCEDURE 3: When the Auto-cruise Control "CANCEL" Switch is Set to ON, Auto-cruise Control is not Cancelled.
- INSPECTION PROCEDURE 4: Auto-cruise Control cannot be Set.
- INSPECTION PROCEDURE 5: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed.
- INSPECTION PROCEDURE 6: Auto-cruise Control Indicator Light inside Combination Meter does not Illuminate. (However, Auto-cruise Control is Normal).
- Data List Reference Table
- Pcm Terminal Voltage Reference Chart For Auto-Cruise Control System Operation
- On-Vehicle Service
- Auto-Cruise Control Main Switch Check
- Auto-Cruise Control Setting
- Speed-Increase Setting
- Speed-Reduction Setting
- Return To The Set Speed Before Cancellation And Auto-Cruise Control Cancellation
- Auto-Cruise Control System Component Check
- Transmission Range Switch ("N" POSITIN)
- Throttle Position Sensor
- Auto-Cruise Control Switch Check
- Auto-Cruise Control