Fastener Tightening Specifications
INTAKE MANIFOLDFASTENER TIGHTENING SPECIFICATIONS
ITEM SPECIFICATION
Center cover bolt 3.0 ± 0.5 Nm (27 ± 4 in-lb)
EGR vacuum regulator solenoid bolt 11 ± 1 Nm (98 ± 8 in-lb)
EGR valve bolt 20 ± 2 Nm (15 ± 1 ft-lb)
Evaporative emission purge solenoid bolt 11 ± 1 Nm (98 ± 8 in-lb)
Fuel high-pressure hose bolt 5.0 ± 1.0 Nm (44 ± 9 in-lb)
Fuel pressure solenoid bolt 11 ± 1 Nm (98 ± 8 in-lb)
Fuel rail bolt 11 ± 1 Nm (98 ± 8 in-lb)
Generator brace bolt 22 ± 1 Nm (98 ± 8 in-lb)
Ground cable bolt 5.0 ± 1.0 Nm (44 ± 9 in-lb)
Intake manifold bolt
M8 20 ± 2 Nm (15 ± 1 ft-lb)
M10 36 ± 6 Nm (27 ± 4 ft-lb)
Intake manifold nut 36 ± 6 Nm (27 ± 4 ft-lb)
Intake manifold stay bolt 31 ± 3 Nm (23 ± 2 ft-lb)
Manifold differential pressure sensor bolt 5.0 ± 1.0 Nm (44 ± 9 in-lb)
Oil level gauge guide bolt 13 ± 1 Nm (115 ± 9 in-lb)
Vacuum hose and pipe assembly bolt 11 ± 1 Nm (98 ± 8 in-lb)