Front Wheel Alignment Check And Adjustment: Toe-In
WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
Standard value: 0 plus/minus 3 mm (0 plus/minus 0.12 inch)
NOTE:
If the toe-in is not within the standard value, adjust the toe-in by undoing the clips and turning the left and right tie rod turn buckles by the same amount (in opposite directions).
NOTE:
The toe will move out as the left turn buckle is turned toward the front of the vehicle and the right turn buckle is turned toward the rear of the vehicle.
For each one turn of the left and right tie rods, the toe-in will be adjusted by approximately 1 °05' (per wheel).