LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Eclipse GS, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control >> On-Vehicle Service >> Auto-Cruise Control Switch Check >> Auto-Cruise Control Main Switch Check >> Speed-Reduction Setting
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed-Reduction Setting

  1. Set to the desired speed.
  2. Push the auto-cruise control switch in the direction of arrow.
  3. Check to be sure that deceleration continues while the switch is pressed, and that after it is released the constant speed at the time when it was released becomes the driving speed.
    NOTE: When the vehicle speed reaches the low limit [approximately 40 km/h (25 mph)] during deceleration, the auto-cruise control will be cancelled.
    Fig 1: Checking Speed-Reduction Setting
    G02424968Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals