Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE |
|---|---|
| Toe-in mm (in) | 3 +/- 2 (0.12 +/- 0.07) |
| Camber | -1° 00' +/- 30' (Difference between right and left within 30') |
| Thrust angle | 0°00' +/- 0°09' |
| Upper arm ball joint turning torque N.m (in-lb) | 0.5 - 2.5 (4.4 - 22) |
| Trailing arm ball joint turning torque N.m (in-lb) | 0.5 - 2.5 (4.4 - 22) |
| Assist link ball joint turning torque N.m (in-lb) | 0.5 - 2.5 (4.4 - 22) |
| Assist link slide bushing turning torque N.m (in-lb) | 0.5 - 2.0 (4.4 - 17) |
| Lower arm pillow ball bushing turning N.m (in-lb) | 0.5 - 3.0 (4.4 - 26) |
| Stabilizer bar link ball joint turning torque N.m (in-lb) | 1.7 - 3.1 (15 - 27) |