Removal And Installation: Notes

WARNING: This page is about a different variant/trim than selected.

CAUTION:

When the engine assembly replacement is performed, use scan tool MB991958 to initialize the learning value (Refer to INITIALIZATION PROCEDURE FOR LEARNING VALUE IN MFI ENGINE ).
If the vehicle is equipped with the Brembo™ disc brake, during maintenance, take care not to contact the parts or tools to the caliper because the paint of caliper will be scratched.
*: indicates parts which should be temporarily tightened, and then fully tightened with the engine weight applied on the vehicle body.

Fig 1: Removing And Installing Of Engine Assembly (1 Of 2)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Removing And Installing Of Engine Assembly (2 Of 2)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools: