LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Basic Brake System - Lancer Evolution) >> Brake Pedal >> Inspection >> Stoplight Switch Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stoplight Switch Check

WARNING: This page is about a different variant/trim than selected.
  1. Connect an ohmmeter between the stoplight switch connector terminals.
  2. There should be no continuity between the terminals when the plunger is pushed in as shown. There should be continuity when it is released.
    Fig 1: Checking Continuity Between Stoplight Switch Connector Terminals
    G04297309Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals