Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Rear axle total backlash mm (in) | - | 6 (0.2) | ||
| Wheel bearing breakaway torque N. m (ft-lb) | - | 1.0 (0.74) | ||
| Wheel bearing end play mm (in) | - | 0.05 (0.002) | ||
| TJ boot assembly dimension mm (in) | 90 +/- 3 (3.5 +/- 0.1) | - | ||
| Drive gear backlash mm (in) | 0.11 - 0.16 (0.004 - 0.006) | - | ||
| Drive gear runout mm (in) | - | 0.05 (0.002) | ||
| Drive pinion turning torque N. m (in-lb) | Without oil seal | 0.88 - 1.17 (7.8 - 10.4) | - | |
| With oil seal | Companion flange (oil seal contacting area) with anti-rust agent | 0.98 - 1.27 (8.67 - 11.24) | - | |
| Companion flange (oil seal contacting area) with gear oil applied | 0.49 - 0.58 (4.34 - 5.13) | - | ||
| LSD case assembly | Right-to-left difference in combined thickness of friction plate and friction disc mm (in) | 0 - 0.05 (0 - 0.002) | - | |
| Clearance between spring plate and differential case mm (in) | 0.06 - 0.25 (0.002 - 0.010) | - | ||
| LSD differential torque N. m (ft-lb) | When new clutch plate is installed | 5 - 19 (3.7 - 14) | - | |
| When existing clutch plate is installed | 2 - 19 (1.5 - 14) | - | ||
| Distortion of friction plate and friction disc mm (in) | - | 0.08 (0.003) | ||
| Difference in thickness between friction plate, friction disc, and spring plate mm (in) | - | 0.1 (0.004) | ||