Stoplight Switch
WARNING: This page is about a different variant/trim than selected.
- Disconnect the connector.
- Check for continuity between the terminals of the switch.
STOPLIGHT SWITCH MEASUREMENT CONDITION
| MEASUREMENT CONDITION | TERMINAL CONNECTOR OF TESTER | SPECIFIED CONDITION |
|---|---|---|
| When brake pedal is depressed. | 1 - 2 (for stoplight circuit) | Less than 2 ohms |
| 3 - 4 (for auto-cruise control circuit) | Open circuit | |
| When brake pedal is not depressed. | 1 - 2 (for stoplight circuit) | Open circuit |
| 3 - 4 (for auto-cruise control circuit) | Less than 2 ohms |