Column Switch
WARNING: This page is about a different variant/trim than selected.
COLUMN SWITCH TERMINAL VALUE CONDITION CHART
| TERMINAL NO. | INSPECTION ITEM | INSPECTION CONDITION | NORMAL VALUE |
|---|---|---|---|
| 1 | Battery power supply | Always | Battery positive voltage |
| 2 | Input of data request signal | Always | 0 - 12 V (pulse signal) |
| 3 | SWS communication line | Always | 0 - 12 V (pulse signal) |
| 4 | Ground | Always | 0V |
| 6 | Output of signal from windshield intermittent wiper interval adjusting knob | Igniting switch: "ACC," Windshield intermittent wipe interval adjusting knob: "FAST" --> "SLOW" | 0 --> 2.5 V |
| 8 | Output of backup signal from windshield wiper switch | Windshield low-speed wiper switch or windshield high-speed wiper switch: ON | 0V |
| 9 | Power supply to ignition switch (IG1) | Ignition switch: "ON" | Battery positive voltage |
| 10 | Output of backup signal from headlight switch | Ignition switch: "ON," Headlight switch: ON | 0V |