Configuration Of Functions

WARNING: This page is about a different variant/trim than selected.

CONFIGURATION OF FUNCTIONS

ITEM	ADJUSTMENT PROCEDURE
Keyless entry hazard answerback	If the transmitter "LOCK" switch is turned on twice within two seconds, the lock answerback function is enabled or disabled. If the function is enabled, the tone alarm sounds once, (initial status) If the function is disabled, the tone alarm sounds twice. If the transmitter "UNLOCK" switch is turned on twice within two seconds, the unlock answerback function is enabled or disabled. If the function is enabled, the tone alarm sounds once, (initial status) If the function is disabled, the tone alarm sounds twice.
Vehicle speed-dependent wiper function	The vehicle speed-dependent wiper function is enabled or disabled by turning on the windshield wiper mist switch for two seconds or more. Enabled: the tone alarm sounds once, (initial status) Disabled: the tone alarm sounds twice.
Headlight automatic shutdown function	If the passing switch is turned ON for more than two seconds with the headlight switch turned to ON and the turn signal light switch (RH) turned ON, the headlight automatic shutdown function is switched in the following order: (Next to "c", the function returns to "a" and repeats the sequence from "a".) With the ignition switch in "LOCK" (OFF) position, the automatic shutdown function is enabled when the lighting switch is turned ON and the tone alarm sounds once If the function is disabled, the tone alarm sounds twice. When the function is enabled (While the ignition switch is at "LOCK" (OFF) position, the automatic shutdown function is enabled when the lighting switch is turned ON.), the tone alarm sounds three times, (initial status)
The delay-off time of the dome light	When the turn-signal light switch is moved in the order of LH --> RH --> LH --> RH -->. LH, the dome light delay-off time will be changed as follows. (Next to "e", the function returns to "a" and repeats the sequence from "a".) 30 seconds: the tone alarm sounds once. 10 seconds: the tone alarm sounds twice. 0 second (no delay-off time): the tone alarm sounds three times. 15 seconds: the tone alarm sounds four times, (initial status) 5 seconds: the tone alarm sounds five times.
Interior light automatic shutoff function	The interior light automatic shutdown function is disabled or enabled by turning the hazard warning light switch for two seconds or more. Enabled: the tone alarm sounds once. (initial status) Disabled: the tone alarm sounds twice.
Initialization of above mentioned functions	If the windshield washer switch is turned ON for more than 20 seconds, the tone alarm sounds twice and all functions are initialized. (The configuration mode entry tone alarm sounds after 10 seconds, but the switch must kept ON for 20 seconds to achieve initialization.) If the windshield washer switch is kept ON for more than 20 seconds without prior entry of the configuration mode, the configuration mode is entered after 10 seconds And initialization does not take place.