Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | 31 +/- 45' +/-90° 1° 30' | - | |
| Outside wheel (reference) | 27° 15' | - | ||
| Toe-in mm (in) | 0 +/- 2 (0 +/- 0.08) | - | ||
| Tie rod end ball joint breakaway torque N. m (in-lb) | 1.0 - 3.0 (8.9 - 26.6) | - | ||
| Tie rod swing resistance N (lb) [Tie rod swing torque N. m (in-lb)] | 8 - 27 (1.8 - 6.1) [1.5 - 4.9 (13.2 - 43.4)] | - | ||
| Engine idle speed r/min | 850 +/- 100 | - | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 32 (7.2) or less [6.0 (1.35) or less] | - | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.4 - 9.0 (1,219 - 1,306) | - | |
| Pressure under no-load conditions | 0.2 - 0.8 (29 - 116) | - | ||
| Steering gear retention hydraulic pressure | 8.4 - 9.0 (1,219 - 1,306) | - | ||
| Oil pressure switch operating pressure MPa (psi) | OFF --> ON | 1.8 - 2.4 (261 - 348) | - | |
| ON --> OFF | 1.0 - 2.4 (145 - 348) | - | ||
| Steering gear total pinion torque N. m (in-lb) [Change in torque N. m (in-lb)] | 0.8 - 1.8 (7.1 - 15.9) [0.49 (4.3) or less] | - | ||
| Opening dimension of special tool boot band crimping tool (MB991561) mm(in) | 2.9 (0.11) | - | ||
| Band crimped width mm(in) | 2.4 - 2.8 (0.09 - 0.11) | - | ||