Procedures For Calibrating The Compass

Press the "COMP" button. The visual display is now in compass mode and the vehicle's directional heading (N, NE, E, SE, S, SW, Wand NW) will be displayed.
Pressing the "COMP" button a second time will turn off the visual display.

Fig 1: Identifying COMP Button
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
If the display reads "C," there may be a strong magnetic field interfering with the compass. In this case, the compass may need calibration.

Fig 2: Identifying C On Display
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Drive the vehicle in a circle at about 5 mph (8km/h) or less until the display reads a direction.

Fig 3: Driving Vehicle In Circle
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.