B2100-Ignition Run/Start Input Circuit Performance: Notes

Fig 1: Ignition System - Electrical Diagnostics - Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

For a complete wiring diagram Refer to SYSTEM WIRING DIAGRAMS .

• When Monitored:

  With the ignition on  .

• Set Condition:

  The Front Control Module will set this DTC if the CAN bus message and the hardwired ignition switch circuit do not match the position of the ignition switch  .

Possible Causes 

INTEGRATED POWER MODULE FUSE

(F941) IGNITION SWITCH OUTPUT CIRCUIT OPEN

(F202) FUSED IGNITION SWITCH OUTPUT CIRCUIT OPEN

INTEGRATED POWER MODULE

FRONT CONTROL MODULE