Symptom Chart
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned "ON" position with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
SYMPTOM CHART
| SYMPTOM | INSPECTION PROCEDURE | REFERENCE |
|---|---|---|
| Communication with scan tool is not possible. | 1 | INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. |
| Power supply circuit. | 2 | INSPECTION PROCEDURE 2: POWER SUPPLY CIRCUIT. |
| Odometer and trip meter are not displayed. | 3 | |
| All the needle meters do not work. | 4 | |
| When the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate. | 5 | |
| Speedometer does not work (other meters work). | 6 | INSPECTION PROCEDURE 6: SPEEDOMETER DOES NOT WORK (OTHER METERS WORK). |
| The fuel gauge needle moves excessively. | 7 | |
| Tachometer does not work (other meters work). | 8 | INSPECTION PROCEDURE 8: TACHOMETER DOES NOT WORK (OTHER METERS WORK). |
| Fuel gauge does not work (other meters work). | 9 | INSPECTION PROCEDURE 9: FUEL GAUGE DOES NOT WORK (OTHER METERS WORK). |
| Engine coolant temperature gauge does not work (other meters work). | 10 | INSPECTION PROCEDURE 10: ENGINE COOLANT TEMPERATURE GAUGE DOES NOT WORK (OTHER METERS WORK). |
| The fuel warning light does not illuminate or go out. | 11 | INSPECTION PROCEDURE 11: THE FUEL WARNING LIGHT DOES NOT ILLUMINATE OR GO OUT. |