Symptom Chart
NOTE:
For additional Symptom Chart information, refer to TSB UPDATED CRUISE CONTROL DIAGNOSIS - SERVICE MANUAL REVISION
.
SYMPTOM CHART
| Symptom | Inspection procedure number | |
|---|---|---|
| Scan tool communication with ECM Is not possible. | GROUP 13Ab, Symptom Procedures - Inspection Procedure 1 P.13Ab-753. | |
| Auto-cruise control system is not cancelled. | When brake pedal is depressed | 1 |
| When selector lever is moved to "N" position | 2 | |
| When "CANCEL" switch is turned ON | 3 | |
| Auto-cruise control system cannot be set. | 4 | |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. | 5 | |
| When "ON/OFF" switch is turned "ON", "CRUISE" indicator light inside combination meter does not illuminate. (However, autocruise control system is normal). | 6 | |