LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control System >> On-Vehicle Service >> Auto-Cruise Control System Operation Check >> Speed-Increase Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed-Increase Setting

  1. Switch the "ON/OFF" switch to "ON".
  2. Set to the desired speed, above approximately 40 km/h (25 mph).
  3. Push the "ACC/ES" switch.
  4. Check to be sure that acceleration continues while the "ACC/RES" switch is pushed, and that the speed at the time it was released becomes the constant driving speed.
    NOTE: Acceleration can be continued even if the vehicle speed has passed the high-speed limit [approximately 160 km/h (100 mph)]. But the constant driving speed when the "ACC/RES" switch is released will be recorded as the high-speed limit.
    Fig 1: Identifying Auto-Cruise Control Switch - ACC/RES
    G04871030Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals