LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Outlander XLS, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control System >> On-Vehicle Service >> Auto-Cruise Control System Operation Check >> Speed-Reduction Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed-Reduction Setting

  1. Switch the "ON/OFF" switch to "ON".
  2. Set to the desired speed, above approximately 40 km/h (25 mph).
  3. Push the "COAST/SET" switch.
  4. Check to be sure that deceleration continues while the "COAST/SET" switch is pushed, and that the speed at the time it was released becomes the constant driving speed.
    NOTE: When the vehicle speed reaches the low limit [approximately 40 km/h (25 mph)] during deceleration, the auto-cruise control will be cancelled.
    Fig 1: Identifying Auto-Cruise Control Switch - COAST/SET
    G04871029Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals