LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2008 >> Lancer Evolution MR >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control - Lancer Evolution >> Auto-Cruise Control >> On-Vehicle Service >> Cruise Control Switch Check >> Cruise Control Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Setting

  1. Switch the "ON/OFF" switch to "ON".
  2. Drive at the desired speed, above approximately 40 km/h (25 mph).
  3. Push the "COAST/SET" switch.
  4. Fig 1: Pushing "COAST/SET" Switch
    G05393809Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Check to be sure that cruise control is activated when the "COAST/SET" switch is released.
    NOTE: If the vehicle speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, it is normal for the cruise control to be cancelled. When the vehicle speed becomes approximately 40 km/h (25 mph) or less, driving at constant speed will be cancelled even if the vehicle speed does not decrease approximately 15 km/h (9 mph) or more.