LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Lancer ES, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control >> Auto-Cruise Control >> On-Vehicle Service >> Cruise Control System Operation Check >> Speed-Increase Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed-Increase Setting

  1. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated.)
  2. Set to the desired speed, above approximately 40 km/h (25 mph.)
  3. Press the "ACC/RES" switch.
  4. Check to be sure that acceleration continues while the "ACC/RES" switch is pressed, and that the speed at the time it was released becomes the constant driving speed.
NOTE: Acceleration can be continued even if the vehicle speed has passed the high-speed limit [approximately 200 km/h (125 mph)]. But the constant driving speed when the "ACC/RES" switch is released will be recorded as the high-speed limit.
Fig 1: Locating ACC/RES Switch - 2.0L Engine Non-Turbo, 2.4L Engine
G05903782Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Locating ACC/RES Switch - 2.0L Engine Turbo
G05903783Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals