Symptom Chart
NOTE:
For additional Symptom Chart information, refer to TSB UPDATED CRUISE CONTROL DIAGNOSIS - SERVICE MANUAL REVISION
.
SYMPTOM CHART
| Symptom | Inspection Procedure Number | |
|---|---|---|
| Communication with scan tool is not possible. | Communication with the ECM only is impossible. <2.0L ENGINE Non-turbo> | INSPECTION PROCEDURE 1 |
| Communication with the ECM only is impossible. <2.0L ENGINE Turbo> | INSPECTION PROCEDURE 1 | |
| Communication with the ECM only is impossible. <2.4L ENGINE> | INSPECTION PROCEDURE 1 | |
| Cruise control is not cancelled. | When the brake pedal is depressed. | 1 |
| When the clutch pedal is depressed. <M/T> | 2 | |
| When the selector lever is moved to "N" position. <CVT> | 3 | |
| When the shift lever is moved to "N" position. <TC-SST> | 4 | |
| When the "CANCEL" switch is pressed. | 5 | |
| Cruise control system cannot be set (No response "COAST/SET" switch and "ACC/RES" switch is pressed.) <2.0L ENGINE Non-turbo, 2.4L ENGINE> | 6 | |
| Cruise control system cannot be set (No response "COAST/SET" switch and "ACC/RES" switch is pressed.) <2.0L ENGINE Turbo> | 7 | |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. <M/T> | 8 | |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. <CVT> | 9 | |
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. <TC-SST> | 10 | |
| When the "ON/OFF" switch is turned ON, "CRUISE" indicator light inside combination meter does not illuminate (However, cruise control system is normal.) | 11 | |