Body Control Module: Service and Repair
ETACS-ECUREMOVAL AND INSTALLATION
WARNING:
- Before removing the ETACS-ECU and knee air bag module, refer to Air Bag Systems, Service Precautions and Knee Air Bag Module, Air Bag, Service and Repair.
- When removing and installing the ETACS-ECU, do not let it bump against the knee air bag module.
CAUTION: When replacing the ETACS-ECU, use the ETACS-ECU to which the chassis number is written and the coding is implemented. Also, if diagnosis code No. B1761 "VIN not programmed" or No. B222C "Coding not completed" is set to the ETACS-ECU, replace with the ETACS-ECU to which the chassis number same as that of vehicle is written and the coding is implemented.
Pre-removal & Post-installation Operation:
Removal Step 1:
