LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Raider 4D Pickup, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Electrical >> Ignition System - Service Information >> Specifications >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

IGNITION SYSTEM - TORQUE SPECIFICATION

DESCRIPTION N.m Ft. Lbs. In. Lbs.
Camshaft Position Sensor - 3.7L 12 - 106
Camshaft Position Sensor - 4.7L 12 - 106
Crankshaft Position Sensor - 3.7L 28 21 205
Crankshaft Position Sensor - 4.7L 28 21 205
Ignition Coil Mounting - 3.7L 8 - 70
Ignition Coil Mounting - 4.7L (2) 12 - 106
(1) Knock Sensor - 3.7L 20 15 +/- 2 176
(1) Knock Sensor - 4.7L 20 15 +/- 2 176
Spark Plugs - 3.7L 27 20 -
Spark Plugs - All 4.7L (Upper or lower row) (New plugs/gaskets) 27 +/- 3 20 -
Spark Plugs - All 4.7L (Upper or lower row) (Used plugs/gaskets) 22 +/- 3 16 -
Ignition switch mounting screws 3 - 26
** Torque critical tapered design. Do not exceed 15 ft. lbs.
(1) Do not apply any sealant, thread-locker or adhesive to bolts. Poor sensor performance may result.
(2) This same bolt is also used to mount the intake manifold.
scientia non olet · About LEMON Manuals