Fuel Level Sensor Float Height

WARNING: This page is about a different variant/trim than selected.

Remove the fuel pump module (Refer to FUEL TANK <2.0 L engine, 2.4 L engine> or FUEL TANK <RALLIART>).

When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

<FWD> Standard value:

STANDARD VALUE CHART

Float position	Float height {mm (in)}
Stopper position "F" (height A)	181.5 (7.1)
Stopper position "E" (height B)	26.7 (1.0)

<AWD> Standard value:

STANDARD VALUE CHART

Float position	Float height {mm (in)}
Float position	Main	Sub
Stopper position "F" (height A)	140.9 (5.5)	14.2 ± 3.0 (0.6 ± 0.1)
Stopper position "E" (height B)	39.1 (1.5)	179.3 ± 3.0 (7.1 ± 0.1)

Fig 1: Identifying Fuel Level Sensor Float Height

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.