How to Read Data List

DIAGNOSTIC FUNCTION

HOW TO READ DATA LIST

Required Special Tools:

- MB991958: Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: V.C.I.
- MB991827: M.U.T.-III USB Cable
- MB991910: M.U.T.-III Main Harness A

1. Connect scan tool MB991958 to the data link connector.

2. Turn the ignition switch to the "ON" position.

3. Select "System Select" from the start-up screen.

4. Select "From 2006 MY" of "Model Year." When the "Vehicle Information" is displayed, check the contents.

5. "Select "AUTO CRUISE" from "System List", and press the "OK" button.
NOTE:
When the "Loading Option Setup" list is displayed, check the applicable item.

6. Select the "MITSUBISHI."

7. Select the "Data List."
NOTE:
When the "Data List Reference Table" button is selected, the service data reference table is displayed, and the normal values can be checked.