LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer SE >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - Lancer >> On-Vehicle Service >> Cruise Control System Operation Check >> Cruise Control Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Setting

  1. Start the engine.
  2. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated.)
  3. Drive at the desired speed, above approximately 40 km/h (25 mph.)
  4. Press the "COAST/SET" switch.
  5. Check to be sure that when the "COAST/SET" switch is released the speed is the constant speed.
NOTE: If the vehicle speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, it is normal for the cruise control to be cancelled. When the vehicle speed becomes low-speed limit [approximately 40 km/h (25 mph)] or less, driving at constant speed will be cancelled even if the vehicle speed does not decrease 15 km/h (9 mph) or more.
Fig 1: Locating Cruise Control Coast/Set Switch (2.0L Engine Non-Turbo, 2.4L Engine)
G08290786Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Locating Cruise Control Coast/Set Switch (2.0L Engine Turbo)
G08290787Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals