BARTEC TPMS Reset Procedure
IMPORTANT:
Mitsubishi Adapter must be connected to the 400P/400SD/500. ADAPTER is NOT NEEDED on the PRO SERIES TOOLS.
You will select either
- Reduce pressure to activate sensors.
- Use a second activation tool to activate sensor.
OBD Connect: Assisted Relearn
- Inflate tires to correct pressure.
- Read all sensor IDs using tool.
- Connect tool to OBDII port using the Mitsubishi adapter.
- Turn Ignition ON.
- Follow on screen prompts to relearn IDS to the vehicle.
- Tool will indicate relearn completed.
NOTE:
If you reduced the pressure to complete, your TPMS light may be on until tires are inflated to placard.