Removal And Installation: Notes

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

The following bolts and screws are used for installing the instrument panel: The bolts and screws are indicated by symbols in the illustrations in sections "REMOVAL AND INSTALLATION" and "DISASSEMBLY AND ASSEMBLY."

Name	Symbol	Dimensions mm (screw diameter x screw length)	Color	Shape
Tapping screw	a	5 x 14	-	Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Tapping screw	b	5 x 16	-	Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Bolt with washer	c	6 x 16	-	Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION:

For the removal of the front passenger's air bag module, refer to SERVICE PRECAUTIONS , DRIVER'S AIR BAG MODULE AND CLOCK SPRING and PASSENGER'S (FRONT) AIR BAG MODULE before operation.
Do not subject SRS-ECU to any shocks when removing or installing the instrument panel.

Fig 1: Removing/Installing Instrument Panel Assembly

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Additional Callouts For Figure 1

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.