REMOVAL AND INSTALLATION - 2.4L Engine: Notes

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When the knock sensor is replaced, initialize the learned value using M.U.T.-III (Refer to INITIALIZATION PROCEDURE FOR LEARNING VALUE IN MFI ENGINE ).
Do not drop or hit the knock sensor against other components. Internal damage may result, and the knock sensor will need to be replaced.

Fig 1: Removing/Installing Knock Sensor With Torque Specifications

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.